Honeycomb - Toronto Bead Society 2025 Bag of Beads Challenge

This year’s Bag of Beads looked beautiful in the bag — warm honey with a touch of turquoise blue. It even came with real amber chips! And some sort of button earring stumpers with smashed down posts, clips, and a load of tiny headpins.

Contents of the Bag of Beads

The Toronto Bead Society (TBS) Bag of Beads challenge is to use at least one from each of the bags in the kit we were given. We could add any other needed supplies from our own stash.

What to do?? No muses for the longest time. The recurring theme that kept coming was “honeycomb”.

Inspiration

The next challenge was how do I create a honeycomb that would hold its hexagonal cell? The logical answer was bead embroidery. But the next decision was, “Will it be another work of art in a shadow box like the last three challenges (Nautilus, Mid-Century Modern Living, Secret Garden)?”, OR “Can I make this challenge be wearable?

 “JUST DO IT!” 

I cut a piece of blue Stiff Felt left over from a previous challenge. Then I tried a few different ways to stitch a honeycomb cell. The most effective way was to draw a 1cm. cell with a pencil, then stitch a light-coloured rough-cut satin beads individually, but then add another on each line. By stitching a metallic gold 13/o seed bead in the corner, a cell shape was created. 

Since I was creating on the fly, I kept drawing a few more hexagonal cells on the blue foundation, then stitching down satin beads with seed beads defining the corners. With time, five rows of cells felt right for the height of a medallion and five and a half cells were best for the width.

Next, the cells needed to be filled in with honey. I tried stitching down the opaque and metallic sienna seed beads in a cell, but it was very sad. Then I strung segments of 1 op. sienna seed, 1 met. sienna seed, 1- 4mm round amber pressed-bead, followed by 1 met. and 1 op. sienna. 

Each segment was secured in between satin beads on one side and pulled across the cell, then secured on other side between satin beads. 

Once five segment strings were secured across all cells, I framed them with a string of alternating single turquoise opaque 8/o seed beads and #2 Czech s/l bugles. The turquoise frame needed to be couched down. So, I trimmed the Stiff Felt foundation fairly close to the honeycomb.

Then stitched down the bugle frame between beads.

STRINGS AND STUMPERS

Next I had to deal with the stumpers. I stitched on the clips to the underside of the metallic button earrings

Then glued them down with E6000.

Since this was going to be a wearable piece, I strung a fine beading wire with alternating turquoise 8/o beads and amber 4mm round beads. Luckily, there were just enough round beads in the Bag! 

To secure the string to the buttons, I added a crimp, wiggled the wire through the underside openings of metallic button, wove the tail back through the crimp and pressed it firmly to stop the strung bead wire from slipping.

ADDING THE BACKING 

Once the string assembly was complete, I stitched down the clips to the back of the bead foundation. The metallic button was left exposed because it was a design element transitioning from the Honeycomb medallion to the fancy bead string.

Luckily, I had a piece of faux leatherette in my stash. I trimmed it to the medallion's size and basted it through all the layers so I could bead a clean finish. A traditional 3-bead finish would not work because of the turquoise bugle/seed frame! Don’t know if anyone ever did this before, but I figured out a way to catch the top and bottom through a sienna seed bead for a systematic stitch. Practical and neat. 

This is my creative solution dealing with the situation at hand. In the end, it looks like a bead sandwich layer between the Honeycomb and leatherette backing!

FRINGE FINISH

In another little bag were two novel beads which needed attention. Since the rule is, “use at least one from each bag”, I chose the round “world” bead instead of the chunky sienna tube bead.

To deal with this heavy bead, I tried suspending it from 8/ turquoise beads in the centre-front of my Honeycomb medallion. I figured surrounding fringes would soften the look.

I like playing with color and shapes in fringes. There were chiseled flat coppery beads (which I donated to the cause) in another bag. As well as a bag and short string of real amber chip beads. I felt there needed to be some zing between these interesting beads. In my stash I had a few turquoise chip slivers which worked really well in between the chiseled bead and amber. Of course, a turquoise seed bead at the bottom would not only holds beads on each fringe from falling, but add the ultimate zing.

The fringe is very organic. Each one varies in length and look because of natural material differences. This was not about perfection, but feel. 

The short headpin was a headache. I managed to thread a few beads on a headpin and attached it to the clip. See the highlighted pin on the photo. Challenge met, but not seen!

This Challenge was fun in the end because I let the beads and materials direct the creative process once I had the honeycomb theme and wanted it to be wearable.